{
  "kubejs.ponder.ae2_multiblock.header": "The Controller Multiblock",
  "kubejs.ponder.ae2_multiblock.text_1": "The Controller multiblock must fit in a 7x7x7 area.",
  "kubejs.ponder.ae2_multiblock.text_2": "A Controller block can only touch up to 3 other Controller blocks.",
  "kubejs.ponder.ae2_multiblock.text_3": "Placing a fourth Controller will disrupt the network.",
  "kubejs.ponder.ae2_multiblock.text_4": "Something like this is the most efficient design.",
  "kubejs.ponder.ae2_multiblock.text_5": "This setup has 48 easily-accessible sides, enough for 1536 channels!",
  "kubejs.ponder.ae2_multiblock.text_6": "It\u0027s highly recommended to use P2P Tunnels.",
  "kubejs.ponder.ae2_multiblock.text_7": "The middle blocks can each connect to 4 P2P Tunnels!",
  "kubejs.ponder.ae2_multiblock.text_8": "Including the center sides, there are 72 faces, enough for 2304 channels!",
  "kubejs.ponder.ae2_multiblock.text_9": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.ae2_single.header": "The Controller Block",
  "kubejs.ponder.ae2_single.text_1": "The ME Controller is the brain of the network.",
  "kubejs.ponder.ae2_single.text_10": "Color your Cables to keep them separate.",
  "kubejs.ponder.ae2_single.text_11": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.ae2_single.text_2": "Each Controller face provides 32 channels.",
  "kubejs.ponder.ae2_single.text_3": "Done properly, a single Controller can support 192 channels",
  "kubejs.ponder.ae2_single.text_4": "Sometimes this isn\u0027t enough, however.",
  "kubejs.ponder.ae2_single.text_5": "You might think, \"Why not just add another Controller wherever?\"",
  "kubejs.ponder.ae2_single.text_6": "That is the devil talking.",
  "kubejs.ponder.ae2_single.text_7": "Having two separate Controllers will disrupt the network, shutting the whole thing down.",
  "kubejs.ponder.ae2_single.text_8": "However, placing Controllers together will form a multiblock!",
  "kubejs.ponder.ae2_single.text_9": "The more faces, the more channels!",
  "kubejs.ponder.boiler_construction.header": "Building the Thermoelectric Boiler",
  "kubejs.ponder.boiler_construction.text_1": "The Thermoelectric Boiler uses Heat to turn Water into Steam.",
  "kubejs.ponder.boiler_construction.text_10": "Additional Heater layers are optional, but make it run faster and hold more Water.",
  "kubejs.ponder.boiler_construction.text_11": "Hollow layers (called Water Cavity layers) can optionally be included, to hold more Water.",
  "kubejs.ponder.boiler_construction.text_12": "Fill a layer with Pressure Dispersers to create a \"Steam Catch layer.\" The entire layer must be filled.",
  "kubejs.ponder.boiler_construction.text_13": "Hollow layers (called Steam Cavity layers) can optionally be included, to hold more Steam",
  "kubejs.ponder.boiler_construction.text_14": "Cap it off, and you\u0027re almost done!",
  "kubejs.ponder.boiler_construction.text_15": "Replace two blocks on the casing on a Heater or Water Cavity layer with Valves.",
  "kubejs.ponder.boiler_construction.text_16": "One acts as a Water input...",
  "kubejs.ponder.boiler_construction.text_17": "...and the other as Heat input.",
  "kubejs.ponder.boiler_construction.text_18": "Replace a block on the casing on a Steam Catch or Steam Cavity layer with another Valve.",
  "kubejs.ponder.boiler_construction.text_19": "This will act as the Steam output.",
  "kubejs.ponder.boiler_construction.text_2": "Its design is modular, here\u0027s how you make it.",
  "kubejs.ponder.boiler_construction.text_20": "And that\u0027s it! Your Boiler is now ready to run!",
  "kubejs.ponder.boiler_construction.text_21": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.boiler_construction.text_3": "The Boiler can be anywhere from a 3x4x3 to 18x18x18.",
  "kubejs.ponder.boiler_construction.text_4": "We\u0027ll be making a 5x7x5 here.",
  "kubejs.ponder.boiler_construction.text_5": "Make the bottom first",
  "kubejs.ponder.boiler_construction.text_6": "Fill the next layer with Superheating Elements.",
  "kubejs.ponder.boiler_construction.text_7": "Surround this layer with Boiler Casing.",
  "kubejs.ponder.boiler_construction.text_8": "This layer is now a \"Heater layer.\"",
  "kubejs.ponder.boiler_construction.text_9": "The non-corners can be Structural Glass instead",
  "kubejs.ponder.dt_construction.header": "Building a Dynamic Tank",
  "kubejs.ponder.dt_construction.text_1": "The Dynamic Tank is a modular multiblock that stores a fluid.",
  "kubejs.ponder.dt_construction.text_2": "This is how it\u0027s built.",
  "kubejs.ponder.dt_construction.text_3": "Make a cuboid frame out of Dynamic Tank blocks...",
  "kubejs.ponder.dt_construction.text_4": "...and fill the sides with either more Tank blocks or Structural Glass.",
  "kubejs.ponder.dt_construction.text_5": "For every block that makes up the Tank (including edges), the Tank can hold 16 buckets of fluid.",
  "kubejs.ponder.dt_construction.text_6": "The smallest Tank (3x3x3) holds 432 buckets, and the largest Tank (18x18x18) holds 93,312.",
  "kubejs.ponder.dt_construction.text_7": "Replace two blocks with Dynamic Valves.",
  "kubejs.ponder.dt_construction.text_8": "That really is it! Your tank is now ready!",
  "kubejs.ponder.dt_construction.text_9": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.fission_construction.header": "Building the Fission Reactor",
  "kubejs.ponder.fission_construction.text_1": "The Fission Generator is a multiblock that generates a massive amount of heat.",
  "kubejs.ponder.fission_construction.text_10": "Fill the walls with Reactor Glass (or more Reactor Casing).",
  "kubejs.ponder.fission_construction.text_11": "Place a pillar of Fusion Fuel Assemblies anywhere inside",
  "kubejs.ponder.fission_construction.text_12": "The more you put, the faster the Reactor burns fuel.",
  "kubejs.ponder.fission_construction.text_13": "On top of the pillar, place a Control Rod Assembly.",
  "kubejs.ponder.fission_construction.text_14": "This must be BELOW the Reactor\u0027s top, not part of it.",
  "kubejs.ponder.fission_construction.text_15": "There can be multiple sets of Control Rods, but they cannot touch sides.",
  "kubejs.ponder.fission_construction.text_16": "Anywhere on any of the sides, place 4 Fission Reactor Ports:",
  "kubejs.ponder.fission_construction.text_17": "One for Fuel input",
  "kubejs.ponder.fission_construction.text_18": "One for Coolant input",
  "kubejs.ponder.fission_construction.text_19": "One for Heated Coolant output",
  "kubejs.ponder.fission_construction.text_2": "It does this by coolant (like Water)...",
  "kubejs.ponder.fission_construction.text_20": "And one for Radioactive Waste output",
  "kubejs.ponder.fission_construction.text_21": "And now your Fission Reactor is complete!",
  "kubejs.ponder.fission_construction.text_22": "Running it is VERY dangerous though, so make sure to read the quests explaining it!",
  "kubejs.ponder.fission_construction.text_23": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.fission_construction.text_3": "...into something hotter (like Steam).",
  "kubejs.ponder.fission_construction.text_4": "Fueled by Fissile Fuel..",
  "kubejs.ponder.fission_construction.text_5": "...it creates dangerous Radioactive Waste as a byproduct.",
  "kubejs.ponder.fission_construction.text_6": "This is how it\u0027s built.",
  "kubejs.ponder.fission_construction.text_7": "It can be anywhere from 3x4x3 to 18x18x18",
  "kubejs.ponder.fission_construction.text_8": "Build the frame out of Fission Reactor Casing",
  "kubejs.ponder.fission_construction.text_9": "Cap the top and bottom as well.",
  "kubejs.ponder.fusion_construction.header": "Building the Fusion Reactor",
  "kubejs.ponder.fusion_construction.text_1": "Mekanism\u0027s Fusion Reactor can make an extreme amount of FE/t.",
  "kubejs.ponder.fusion_construction.text_2": "This is how it\u0027s built.",
  "kubejs.ponder.fusion_construction.text_3": "Use \"Q\" to see what each block is.",
  "kubejs.ponder.fusion_construction.text_4": "Any Frames that aren\u0027t on a corner can be replaced with Reactor Glass",
  "kubejs.ponder.fusion_construction.text_5": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.induction_construction.header": "Building an Induction Matrix",
  "kubejs.ponder.induction_construction.text_1": "The Induction Matrix is a modular multiblock that stores FE.",
  "kubejs.ponder.induction_construction.text_10": "A max sized Matrix with the most Cells possible could store 6,552,000,000,000,000 FE!",
  "kubejs.ponder.induction_construction.text_11": "Close it back up (air inside is fine)",
  "kubejs.ponder.induction_construction.text_12": "FE is piped into the input Induction Port...",
  "kubejs.ponder.induction_construction.text_13": "...and out of the output Port.",
  "kubejs.ponder.induction_construction.text_14": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.induction_construction.text_2": "This is how it\u0027s built.",
  "kubejs.ponder.induction_construction.text_3": "It must be a rectangular prism, but it can be anywhere from 3x3x4 to 18x18x18",
  "kubejs.ponder.induction_construction.text_4": "The edges must be made out of Induction Casing...",
  "kubejs.ponder.induction_construction.text_5": "...but the centers can have Induction Ports anywhere inside.",
  "kubejs.ponder.induction_construction.text_6": "An Induction Provider must be placed anywhere inside.",
  "kubejs.ponder.induction_construction.text_7": "Having more Induction Providers, or Providers of higher tiers, increases the rate FE can move in and out.",
  "kubejs.ponder.induction_construction.text_8": "An Induction Cell must also be placed anywhere inside.",
  "kubejs.ponder.induction_construction.text_9": "More Cells, or Cells of higher tiers, increase the capacity of the Matrix.",
  "kubejs.ponder.spirit_fire.header": "How to get spirit fire",
  "kubejs.ponder.spirit_fire.text_1": "Drop the item",
  "kubejs.ponder.spirit_fire.text_2": "Light the item on fire",
  "kubejs.ponder.sps_construction.header": "Building the SPS",
  "kubejs.ponder.sps_construction.text_1": "The SPS turns energy and Polonium into Antimatter.",
  "kubejs.ponder.sps_construction.text_10": "One for energy input",
  "kubejs.ponder.sps_construction.text_11": "One for Antimatter output",
  "kubejs.ponder.sps_construction.text_12": "Any Port can be anywhere inside any circle.",
  "kubejs.ponder.sps_construction.text_13": "The Supercharged Coil has to be on the Port that accepts power.",
  "kubejs.ponder.sps_construction.text_14": "The two can be placed on the sides as well",
  "kubejs.ponder.sps_construction.text_15": "The more powered Coils, the faster Antimatter is created!",
  "kubejs.ponder.sps_construction.text_16": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.sps_construction.text_2": "This is how it\u0027s built.",
  "kubejs.ponder.sps_construction.text_3": "Basically, six 7-wide circles of SPS Casing with stuff inside",
  "kubejs.ponder.sps_construction.text_4": "The inside of the circle can be made of any of these:",
  "kubejs.ponder.sps_construction.text_5": "SPS Casing",
  "kubejs.ponder.sps_construction.text_6": "Structural Glass",
  "kubejs.ponder.sps_construction.text_7": "or Reactor Glass",
  "kubejs.ponder.sps_construction.text_8": "Three SPS Ports must be placed inside any of the circles.",
  "kubejs.ponder.sps_construction.text_9": "One for Polonium input",
  "kubejs.ponder.turbine_construction.header": "Building a Turbine",
  "kubejs.ponder.turbine_construction.text_1": "The Industrial Turbine is a multiblock that uses Steam to generate massive amounts of FE.",
  "kubejs.ponder.turbine_construction.text_10": "The walls can be made of Structural Glass, but the corners must be Turbine Casing.",
  "kubejs.ponder.turbine_construction.text_11": "Place a Rotational Complex on the Rotors...",
  "kubejs.ponder.turbine_construction.text_12": "...and completely fill the rest of that layer with Pressure Dispersers.",
  "kubejs.ponder.turbine_construction.text_13": "The more room under this layer, the more Steam the Turbine can hold.",
  "kubejs.ponder.turbine_construction.text_14": "Place an Electromagnetic Coil on the Rotational Complex.",
  "kubejs.ponder.turbine_construction.text_15": "The amount of Coils (and of Rotor Blades) is what decides how much FE is generated.",
  "kubejs.ponder.turbine_construction.text_16": "You can have multiple layers of Coil.",
  "kubejs.ponder.turbine_construction.text_17": "Finish up the walls with Turbine Vents.",
  "kubejs.ponder.turbine_construction.text_18": "The amount of Vents (and of Presssure Dispersers) is what decides the flow rate.",
  "kubejs.ponder.turbine_construction.text_19": "Higher flow rate means more Steam is used, and more FE is produced.",
  "kubejs.ponder.turbine_construction.text_2": "This is how it\u0027s built.",
  "kubejs.ponder.turbine_construction.text_20": "Place a Valve for Steam input...",
  "kubejs.ponder.turbine_construction.text_21": "...and another for FE output!",
  "kubejs.ponder.turbine_construction.text_22": "Ponder originally made for FTB University 1.19!",
  "kubejs.ponder.turbine_construction.text_3": "First, place a base of Casing.",
  "kubejs.ponder.turbine_construction.text_4": "It can be anywhere from 5x5 to 17x17.",
  "kubejs.ponder.turbine_construction.text_5": "Place some Rotors in the middle.",
  "kubejs.ponder.turbine_construction.text_6": "The wider your Turbine, the taller it can be.",
  "kubejs.ponder.turbine_construction.text_7": "Attach Turbine Blades",
  "kubejs.ponder.turbine_construction.text_8": "If the Blades reach out far enough they would go through the walls...",
  "kubejs.ponder.turbine_construction.text_9": "...then you have to make the Turbine either shorter or wider.",
  "ftbuniversity.ponder.tag.ponders": "Modpack Ponders",
  "ftbuniversity.ponder.tag.ponders.description": "Ponders we\u0027ve added!"
}